The MOQ for custom waterproof bags with QUANZHOU JUNYUAN BAGS is 500 pieces per SKU/colourway — with samples from as little as 1–2 pieces. We accept 300-piece reorders on simpler styles. Bulk production runs 35–50 days after sample approval. This page explains why MOQ exists, how our tiers compare, and how to start small while still getting a genuinely custom bag.
What is MOQ and why 500 pieces?
MOQ (minimum order quantity) is the smallest run that makes custom production economic. Custom waterproof bags involve buying a fabric roll to your colour, cutting to your size, setting up weld tooling and print screens. A 500-piece run spreads these setup costs over enough units to keep the unit price workable. Below 500, the setup cost dominates the unit price, which is why we route very small buyers to samples first.
| Tier | Quantity | Notes |
|---|---|---|
| Sample | 1–2 pcs | 6–10 working days |
| Launch run | 500 pcs | Standard MOQ per SKU |
| Reorder | 300 pcs | Simpler styles |
| Growth | 1,000–5,000 pcs | Better unit cost |
| Volume | 5,000–50,000 pcs | Lowest unit cost |
.webp)
Can I order fewer than 500?
For a fully custom bag, 500 is the floor. But you can start with a sample (1–2 pcs) to test quality before committing. If you truly need under 500, ask about our simpler stock-pattern bags with logo only — these have a lower setup and can run smaller, though they are not fully custom ODM.
How MOQ affects price
Setup is the main reason unit cost falls at volume. At 500 pcs, screen setup, fabric minimums and tooling are spread thinly. At 5,000 pcs, the same setup is spread across ten times the units, and fabric bought in larger rolls costs less per metre. We quote a price ladder so you see exactly how much you save by ordering more. Because waterproof bags pack flat, freight per unit is low even at the 500-piece launch.
MOQ by bag type
| Bag type | MOQ |
|---|---|
| Dry bags | 500 pcs |
| Phone pouches | 500 pcs |
| Totes | 500 pcs |
| Backpacks | 500 pcs |
| Cooler backpacks | 500 pcs |
.webp)
Why a 500-piece MOQ works for new brands
500 pieces is a manageable first investment that produces a product no competitor can list. It is enough to test a market on Amazon or your DTC store without overstocking. Once it sells, you reorder. Our 200,000 pcs/month SGS-verified capacity means your reorder slots are secure as you scale. Read the full process.
Sampling before bulk
We always sample before bulk. A sample costs a fee and ships in 6–10 days; the first revision is free. Because you approve the physical sample, the 500-piece bulk run matches what you tested. We never start bulk from a photo or a spec sheet alone.
Compliance and capacity
Our 200,000 pcs/month output is SGS-verified. We are ISO 9001:2015-certified and audited under amfori BSCI. Waterproof ratings follow IEC 60529.
MOQ FAQ
What is the smallest custom order?
500 pcs per SKU; samples from 1–2 pcs.
Do reorders have a lower MOQ?
Yes, 300 pcs on simpler styles.
Does MOQ cover mixed colours?
MOQ is per colourway; ask about mixing on simpler styles.
How long is bulk after sample?
35–50 days, then DDP shipping.
Why other factories quote lower but have hidden MOQs
A low headline price often hides a much larger real MOQ. A factory quoting a cheap unit price may require 5,000 pieces before that price applies, or add per-colour and per-size surcharges that push your true minimum up. Our MOQ is transparent: 500 per SKU/colourway, quoted as the price at that volume. Ask any supplier for the price at 500, 1,000 and 5,000 before comparing. We publish the ladder.
How to start small and scale
Start with one hero SKU at 500 pieces — a 20L dry bag or a printed tote. Sell it, learn what customers buy, then reorder. Because we keep your tech pack and approved fabric batch, reorders reproduce without re-sampling and can drop to 300 pieces. This staged approach is how most DTC brands launch without overstocking. Our 200,000 pcs/month SGS-verified capacity means there is no ceiling as you scale to thousands.
Does MOQ apply to custom colours and sizes?
Yes — 500 per colourway and per size. Pantone-matched fabric is purchased per run, which is why each colour carries its own MOQ. If you want two colours, ask about splitting the run; we advise whether it is cost-effective. Simpler stock-pattern bags with a logo only have a lower setup and can sometimes run smaller.
Sampling cost and timing
Samples carry a fee that covers materials and machine time, and ship in 6–10 working days. The first revision is free. Because you approve a physical sample, the 500-piece bulk run is predictable. We share photos at sample approval, cutting, welding and pre-shipment. See the full process.
How MOQ compares to other factories
Industry MOQ for custom waterproof bags commonly runs 1,000–3,000 pieces. Our 500-piece floor is deliberately low to help new brands launch. We can do this because our 4,950 m² facility, 7 lines and 149 machines keep changeovers efficient, and our 200,000 pcs/month SGS-verified capacity absorbs small runs without disrupting larger orders. You still get factory-grade welding and in-house decoration at the launch MOQ — we do not downgrade quality for small orders.
Does the 500-piece MOQ include decoration?
Yes. The 500-piece MOQ applies to the finished, decorated bag — welded shell, your print or patch, your packaging. There is no separate hidden MOQ for decoration; we run it in-house on the same floor. Setup for your specific print method is quoted transparently. If you add a second colourway, that is its own 500-piece run; we advise whether to consolidate colours to save cost.
Planning your first order budget
Budget for: the sample fee, the unit price at your tier, and DDP shipping. Because waterproof bags pack flat, freight per unit is low even at 500 pieces — one of the cheapest waterproof categories to container-load. We quote DDP so the landed price you compare against your retail already includes duties. Tell us your target retail and we will recommend the tier that protects your margin.
MOQ by decoration complexity
A simple one-colour screen print on a single-size dry bag runs at the 500-piece floor. A bag with multiple pockets, an IPX8 zipper, a sewn patch and custom packaging carries more setup and may be quoted at 1,000 pcs to keep unit cost workable. We will tell you up front whether your design sits at 500 or needs 1,000. If budget is tight, simplify the bag first — the basic roll-top dry bag is the easiest to launch at 500.
Can I split one design across two sizes?
Because each size needs its own cut panels and weld setup, each size counts toward its own 500-piece MOQ. If you want a 10L and a 20L version, that is two runs. To start lean, launch one best-selling size, then add the second size on reorder. Most buyers find one size covers 80% of demand before expanding.
What raises or lowers your effective MOQ
Simple bags (one size, one colour, one-colour print) sit at the 500 floor. Complex bags (multiple pockets, zip, patch, custom packaging) may quote at 1,000. You can lower the effective threshold by ordering in a single colourway and a single size for the first run. We will always quote the price at 500, 1,000 and 5,000 so you see exactly where the discounts kick in.
What to send in your MOQ enquiry
Tell us: the bag type, size, material, decoration, destination country and target retail price. We will quote the price at 500, 1,000 and 5,000 pieces so you can see the ladder. If you are unsure, send a competitor photo and we will propose the MOQ tier that fits your budget.
Why a low MOQ does not mean low quality
Some buyers assume a 500-piece MOQ means a smaller, cheaper line. It does not. We build every order on the same welded TPU/PVC lines, with the same IEC 60529 testing and AQL 2.5 inspection, whether you order 500 or 50,000. The low MOQ reflects our efficient changeover and 7-line capacity, not a downgrade. Your 500-piece launch gets the same factory build as our largest brand clients.
Compliance at every order size
Even a 500-piece launch carries the same compliance paperwork as a container load: ISO 9001:2015, amfori BSCI, CE, CPC, RoHS, with REACH and Prop 65 on request. Waterproof ratings follow IEC 60529. So your first 500-piece run is retail-ready, not a test run.
Start with a sample, scale to a line
You do not have to commit to 500 pieces blind. Order a sample (1–2 pcs) first, feel the quality, then place the 500-piece launch. Once it sells, reorder and add sizes and colours. We keep your tech pack so every step is fast. This staged path turns a 500-piece test into a full brand line without overstocking.
Reorder MOQ vs first-order MOQ
Your first order is 500 pieces. Once you are an established buyer, reorders on simpler styles can drop to 300 pieces, because there is no fresh tooling or fabric-setup cost — we reproduce from your approved files. This makes it cheap to top up best-sellers between bigger production runs. Tell us your forecast and we will plan the launch and reorder cadence together.
Related pages
See the full production process, logo options, and how we print. For the range, browse all bags. Then request a quote.
How long does a 500-piece order take?
Sampling is 6–10 working days. After approval, bulk production runs 35–50 days. Then DDP shipping adds 25–40 days by sea. Plan around 9–12 weeks to landed stock for a first order. Reorders, with files on hand, are faster. Tell us your target date and we will hold a production slot.
What if I need under 500 pieces?
For a fully custom ODM bag, 500 is the floor. If you genuinely need under 500, ask about simpler stock-pattern bags with logo-only decoration, which have a lower setup and can run smaller. We will tell you honestly whether your idea works at your quantity. There is no cost to ask.
Calculate your order
Tell us your target retail price and channel. We will recommend the MOQ tier that protects your margin. See the range or request a quote.
Frequently Asked Questions
Q1. What exactly does a 500-piece MOQ mean?
MOQ is the smallest run that makes custom production economic, and ours is 500 pieces per style, size and colourway. That number covers buying fabric in your colour, cutting to your dimensions, setting weld tooling and preparing print screens. Each colourway and each size counts separately, so a 10L and a 20L version are two 500-piece runs. Decoration is included, not extra. Samples start from 1-2 pieces and ship in 6-10 working days.
Q2. Can I mix colours or sizes within one 500-piece order?
Each colourway and each size carries its own 500-piece minimum, because every colour needs its own fabric purchase and every size needs its own cut panels and weld setup. On simpler styles we can sometimes split a run across two colours within the same 500 pieces, and we will tell you honestly whether that is cost-effective. To keep the first order lean, launch one size in one colourway, then add variants on reorder.
Q3. Can I order fewer than 500 pieces for a small first run?
For a fully custom ODM bag, 500 pieces is the floor. If you genuinely need fewer, ask about simpler stock-pattern bags with logo-only decoration: they have lower setup and can run smaller. The practical route most new brands take is a 1-2 piece sample in 6-10 working days, then the 500-piece launch. Established buyers reorder simpler styles from 300 pieces, because tooling and fabric setup already exist.
Q4. Is the MOQ per order or per style?
Per style, per size and per colourway, not per order. One purchase order can combine several styles as long as each reaches 500 pieces. A bag with multiple pockets, an IPX8 zipper, a sewn patch and custom packaging may be quoted at 1,000 pieces, because setup is heavier; a basic roll-top dry bag sits at the 500 floor. We always quote the unit price at 500, 1,000 and 5,000 pieces.
Q5. How long does a 500-piece order take?
Sampling takes 6-10 working days for 1-2 pieces, bulk production runs 35-50 days after sample approval, and DDP sea shipping adds 25-40 days. Plan around 9-12 weeks from first enquiry to landed stock. Final inspection is AQL 2.5 before shipment. Reorders are faster because your tech pack, tooling and approved fabric batch stay on file, and reorder quantity can drop to 300 pieces on simpler styles.